Henkel Polybit

Description Product Scope Application Guide Data Sheet Elastomeric acrylic waterproofing and protective coating Polytex 10 is a single compo...

Description Product Scope Application Guide Data Sheet High strength free flowing micro concrete Polycrete MC is a high strength, shrinkage ...

DESCRIPTION Rubberized bitumen emulsion  Polycoat RBE 10 is an emulsified rubber modified bitumen coating, which dries to form a tough, seamless, ...

Description Product Scope Application Guide Data Sheet Two part acrylic modified cementitious waterproofing coating Polyflex is a two part a...

Characteristics ► Cold applied. ► Single component, easy to apply. ► Can be applied on damp substrates. ► Asbestos free, odorless. Can be applie...

Polyseal PS PG is a two component pourable, self leveling polysulphide resin based joint sealant. Polyseal PS PG is specifically designed to be use...

Bitutape tS is a non-reinforced twin side adhesive bitumen membrane which comprises of polymerized bitumen sandwiched between a plastic release fil...

Polyprime PS is a single component solvent based adhesion promoting primer for movement and control joints in porous substrates like concrete, bloc...

DESCRIPTION Solvent Based Bitumen Primer Polyprime SB is a quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on...

Characteristics ► Resists the attack of salts like chlorides and sulphates that are present in the soil ► Easy to apply ► Cold applied ► Adheres...

characteristics : ► Excellent resistance to positive water & vapor pressure ►Good dimensional stability under tension ►Good flexibility. Can ac...

DESCRIPTION SBR based bonding agent and admixture Polybond SBR is a Styrene butadiene Rubber copolymer based product which is used in mortar and c...

Description Product Scope Application Guide Data Sheet One part polyurethane joint sealant Polyseal 1PU is a one part low modulus high perfo...

Description Product Scope Application Guide Data Sheet Liquid applied waterproofing and protective coating Polythane P 10 is a liquid applie...

Description Product Scope Application Guide Data Sheet Bitumen emulsion paint (prevents vapour transmission only) Polycoat is an emulsified ...

Polymastic is a single component acrylic co-polymer mastic, which is designed for pointing applications. The mastic on curing forms a pliable flexi...

Characteristics : ► Waterproof ► Flexible ► Permanent bond ► Tearproof ► Non-ageing Scope of use For waterproof bridging of expansion and edge join...

Bitutape Putty-K is a chemical resistant oil based mastic putty used for smoothening of tough & intricate profiles and filling of voids and cre...

Polypoxy CT is a two component bitumen modified liquid epoxy resin coating. Polypoxy CT is a high build, dense, coating designed to protect concret...

DESCRIPTION SBS modified bitumen emulsion   Polycoat RBE 15 is an emulsified bituminous coating modified with 10% Styrene Butadiene Styrene Rubber,...

 Cross laminated self adhesive waterproofing membrane  Bitustick XL is a self adhesive waterproofing membrane based on a tropical grade of pol...

DESCRIPTION Mineral Surfaced  bituminous waterproofing membrane Bituplus G 4140 is a high performance polymer modified bituminous waterproofi...

CHARACTERISTICS : ► Excellent adhesion to vertical and horizontal surfaces ► Provides protection against water and vapor ► Excellent resistance to ...

Bitumastic is a single component, solvent based bitumen rubber mastic joint sealant. The sealant on curing forms a tough and flexible seal. It has ...

DESCRIPTION : Polypoxy NF is an easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, rep...

Gun used for CF 1000 Anchoring Chemical Application Main uses The material is based on Portland cement, graded aggregates, special fillers and ch...

Description Product Scope Application Guide Data Sheet Cement based Tile Joint Grout for 1 to 8mm Polybit CE 33 is a fine grouting mortar, e...

Characteristics ► Cold applied ► Single component, easy to apply ► Can be applied on damp substrates ► Can be applied in closed or confined areas. ...

DESCRIPTION Chemical mould release oil  Polyrelease is a chemical release agent applied on mould and shutter surfaces prior to casting concrete. i...

Description : Polyvinyl acetate based bonding agent Rushbond PVA is polyvinyl acetate based polyvinyl suspension used as a surface sealer, bonding ...

Water based mould release agent  Polyrelease WB is a water based release agent, with excellent release properties and superior to those of conventi...

Hydroseal P is a hydrophilic rubber based on polyurethane, which is available in different sizes. Hydroseal P is used for sealing purposes in civil...

Polyshield DPC-HD is a heavy duty bitumen Damp Proof Membrane laminated on to a multi layer high density high tensile polyethylene film. Fields of ...

DESCRIPTION Epoxy joint mortar Stable epoxy resin joint mortar for chemical-resistant grouting.  PROPERTIES Easy application Suitable for wet ar...

POLYZINC is a single component zinc rich epoxy coating for the protection of steel reinforcement and metalwork against corrosion. CHARACTERISTICS ...

Polyprime EP is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. Polyprime ...

Acrylic based concrete curing compound Polycure AC is a non-degradable liquid type of curing and sealing compound based on acrylic and proper wetti...

DESCRIPTION APP modified bituminous waterproofing membrane   Bituplus ULTRA P4180 is a plastomeric high performance bitumen based torch applied wa...

DESCRIPTION Bituminous damp proof membrane Polyshield DPC HD is a polymer modified bitumen Damp Proof Membrane laminated on to a multi layer ...