Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Weber Joint Grout

by Weber
Original price Dhs. 13.00 - Original price Dhs. 35.00
Original price
Dhs. 18.00
Dhs. 13.00 - Dhs. 35.00
Current price Dhs. 18.00
Size: 5kg
Color: B 31 Snow White

Cementitious tile grout

weberjoint is a cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas. 

weberjoint is water resistant, easy to apply, and can be cleaned easily. It is a thixotropic, crack-free, non-slump grout that only needs to be mixed with water. It is also available in a wide range of attractive colors (please consult our color chart board).

Surface of application

External floor, Floor, Roof, Wall

colors : 

Joint Colors - Near-East :

B 31 Snow white,110 Jasmine white,112 Bone white,114 Salmon beige,B32 Coral beige,120 Ivory,J41 Wheat,121 beige,122 Clay,123 Cappuccino,124 Terracotta,125 Chestnut,126 Chocolate,130 Pastel yellow,131 Camomile,132 Mustard,J43 Camel,140 Baby pink,141 Antique pink,142 Cherry,150 Fresh mint,151 Spring leaf,160 Baby blue,161 Sky blue,170 Light grey,171 Platinum,172 Ash grey,173 Charcoal,180 Black

Joint Colors - GCC and KSA

110 Jasmine white,120 Ivory,121 beige,122 Clay,123 Cappuccino,124 Terracotta,125 Chestnut,126 Chocolate,130 Pastel yellow,131 Camomile,132 Mustard,140 Baby pink,141 Antique pink,142 Cherry,150 Fresh mint,151 Spring leaf,160 Baby blue,161 Sky blue170 Light grey,171 Platinum,172 Ash grey,173 Charcoal,180 Black

Lebanon UAE KSA Oman Qatar Kuwait Jordan Egypt
5 kg, 25 kg 5 kg, 20 kg, 25 kg 10 kg, 20 kg, 25 kg 5 kg, 20 kg, 25 kg 5 kg, 20 kg, 25 kg 5 kg, 20 kg, 25 kg 5 kg, 20 kg, 25 kg 5 kg
  • Easy to apply and clean 
  • Thixotropic Non-slump grouts 
  • Water resistant 
  • Non-shrink grout 
  • Crack-free 
  • Only need to be mixed with water 
  • Large range of colors
  • Mixing water ratio as per the data sheet
  • weberjoint thin for joint width 1 to 4mm 
  • weberjoint thick for joint width 4 to 8mm 
  • Apply 24 hours minimum after standard tile adhesives application 
  • Apply 4 hours minimum after fast-setting tile adhesives application 
  • Apply 14 days minimum after tiling with traditional "site-mix" mortar on floors (minimum 3 days for walls) 
  • Substrate must be fully cured, set and dry prior to grouting 
  • All traces of oil or grease must be removed 
  • All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
  • Avoid excess of water while cleaning to prevent discoloration of joints 
  • It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts 
  • Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application