Ceresit Tile Grout CE 33 | Polybit

Recommended use

Polybit CE 33 is used gor filling joints in floor & wall of ceramic, glass, porcelain & mosaics indoor and outdoor areas (like balcony, low height cladding). For narrow and wide joints of 1 to 8 mm

Step by Step
Pour Polybit CE 33 in the measured quantity of cold and clean water and mix with an electric mixer until you obtain a homogenous mixture, free of lumps. 1.5 L of water are required for 5 kg of Polybit CE 33. Mix again after 3 minutes. Apply the joint mortars using the slurry technique. Wipe over and clean freshly grouted tiles with a damp sponge. Remove the dry film later with a soft cloth. Dampen the freshly grouted joints after 24 hours to prevent surface moisture deficiency. Floor tiles can be walked on after only 24 hours. Use CE 33 only in dry conditions and at temperatures of 5°C to 40°C.

Coverage
Check Data Sheet 

Mixing Proportion
Use Water. 1.5-1.6 L water at 5kg

Colour and Quantity
8 colours available in 5kg bags.

Disclaimer 
The information in this document is given to the best of Polybit's knowledge, based on laboratory testing and practical experience. Polybit's products are considered as semi-finished goods and as such, products are often used under conditions beyond Polybit's control. Polybit cannot guarantee anything but the quality of the product itself.