Maxispray FC is an acrylic based, ready to use compound of inert filler materials, for use on all common types of interior building surfaces. It give a high quality, even surface for painting or other finishes. Maxispray FC is suitable for both precast and conventional buildings. It can be applied to pre-cast or fair-faced concrete, sand/cement render, gypsum or cement fibre board. It is also used as a finish coat for Sprayplaster Basecoat/Basecoat DP. When used for finishing ceilings, the final coat may be left spray textured, in which case no further decoration is required. The finished surface does not require priming before painting.
PROPERTIES TERRACO :
Maxispray FC is a ready-mixed for use compound, formulated from a selected blend of acrylic polymers and precisely graded fillers. The products are:
Easy to use
Do not flake off
Have high adhesion power
Have high coverage
AREA OF USE:
For use in all areas requiring up to 3mm coat thickness. For use as a finishing coat for Sprayplaster Basecoat / Basecoat DP. When used for finishing ceilings, the final coat may be left spray textured, in which case no further decoration is required. TERRACO Maxispray FC is suitable for both pre-cast and conventional buildings. They can be applied directly to either new or old solid surfaces of precast or fair-faced concrete, sand/cement render, gypsum or cement fibre board.
APPLICATION & CLEANING OF TOOLS:
TERRACO Maxispray FC is applied using Terraco Sprayplaster equipment and can be used direct from bag without dilution. If dilution is required use 2-3% clean water. Apply 1-2 mist coats and level with 30-60cm spatulas. Sand surface within 4 hours of application to a smooth level surface ready for painting. Clean tools and equipment with water after use.