Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

PU HI-Gloss #2240 White + Catalyst #36

Original price Dhs. 190.00 - Original price Dhs. 920.00
Original price
Dhs. 190.00
Dhs. 190.00 - Dhs. 920.00
Current price Dhs. 190.00
Size: 4L + 2L
Color: White
PU HI-GLOSS #2240 WHITE is a polyurethane material based on hydroxylated polyester resin. It is formulated to give a maximum gloss, thanks for the high quality of raw material. Furthermore, PU HI-GLOSS #2240 WHITE is resistant to both extreme weather with non-yellowing effect, resistant to scratch and abrasion. It provides a very smooth and brilliant finish.

Major Uses : Highly recommended to all woodworks, furniture such as beds, cabinets, chairs, sofas, doors and frames, turned pieces and the likes.


Appearance – Liquid Pigmented

Colour – White

Specific Weight – 1.25 kg/L

Viscosity (25°C) – 38” FC#4

Flash Point – 25°C

Non-Volatile – 45%

VOC Content – 580 g/L

Gloss (60%) >95

Application Condition
Air Temperature 5 -35°C
Relative Humidity 85% max.

Application Method – Conventional or Automatic Spraying

Recommended Catalyst – Catalyst #036

Mixing/Dilution Ratio (FC#4 @ 13-15 sec.)
Base – 100
Cat. – 50
Thinner – 15-20

Pot Life (25°C) – 3 – 4 hrs.

Drying Time (25°C)
Dust Free 20 – 25 mins.
To Touch 45 – 60 mins.
To Recoat 2 – 3 hrs.
Hard Dry 24 – 36 hrs.

Coating Rate – 7 – 9 m2/L

Pencil Hardness – H -2H

One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400-600 grit sand paper is recommended before subsequent coats when recoating time exceeds 3 hrs.

Recommended Basecoat – PU Primer White or Plastofil #350 White



The surface to be top coated should be primed with either Polyurethane Primer or Polyester Primer White.
It should be cleaned, well-sanded and free from dust, oil, water and other contaminants to ensure long lasting effect.
To obtain a smooth finish, ensure that the basecoat is sufficient to avoid uneven and irregular surface.
For cracks, crates and nail holes, it is advisable to fill with either Putty Filler. NC Putty #2185 White or Polyester Putty.
Apply 1-2 coats of PU HI-GLOSS #2240 WHITE horizontally and vertically.