Henkel Polypoxy CT
Polypoxy CT is a two component bitumen modified liquid epoxy resin coating. Polypoxy CT is a high build, dense, coating designed to protect concrete and metal structures.
FIELDS OF APPLICATION
To provide protection to concrete and metal structures such as:-
– concrete foundation
– steel pipes & ferrous metals
– off shore and marine structures
Surface to be coated with Polypoxy CT should be structurally sound, dimensionally stable, clean and free from laitance, oil or any other contaminants. Grit blasting is recommended for complete removal of deleterious materials and other contaminants which will affect the adhesion from the substrate.
Mix part A and part B separately for a minute and then transfer Part B (reactor) to Part A (base) and mix thoroughly for 2 –3 minutes to get a uniform homogenous consistency. Use a slow speed electric drill with a proprietary mixing paddle.
Polypoxy CT can be applied by brush, short hair roller or airless spray. Apply the mixed material to a properly prepared substrate to achieve a uniform coating with minimum wet film thickness of 200 microns. Subsequent coats shall be applied after the coating achieves its initial cure.
4m2/lt./coat will give a Dry Film Thickness of 200 micron.
Clean all equipments with Polysolvent immediately after use. Hardened materials can be removed mechanically only.
STORAGE & SHELF LIFE
Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 6 months in unopened conditions and if stored as per recommendations. excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life.
HEALTH & SAFETY
As with all construction chemical products, caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labeling.
Polypoxy CT 20 lt. kit
Polysolvent 5 lt. & 20 lt. pail