Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Silicone Weber AC - Multipurpose Sealant

by Weber
Original price Dhs. 10.00 - Original price Dhs. 10.00
Original price
Dhs. 10.00
Dhs. 10.00 - Dhs. 10.00
Current price Dhs. 10.00
Color: White

silicone AC is an acetoxy one component multipurpose use silicone, which cures under influence of humidity from the air to form a durable elastic rubber. silicone AC is intended for sealing and grouting joints and to protect against moisture.


silicone AC has been developed for durable elastic sealing of glass in display cabinets, in baths, showers, sinks, sanitary facilities, kitchens, and in major small home repairs. It has an excellent resistance to mold and fungus and a good adhesion on many smooth building materials like stainless steel, ceramic tiles, glass... silicone AC can be used for inside and outside repairs as it has a high resistance to UV radiation and ozone effect, can be used for the protection of polyurethane foams


PROPERTIES                                                                       TYPICAL VALUES

Base                                                                                   Acetoxy

Colors Transparent                                                           white, beige, grey (other colors available upon request)

Uncured at 23°C and 50% RH

Density  (ISO 2811-1)                                                      0.96 ± 0.01 g/ml

Skin formation time                                                       5-30 min

Tack free                                                                        5-10 min

Curing rate                                                                    2-3 mm/24h

Flow from vertical surfaces                                           0-3 mm at 50°C (ISO 7390)  Temperature resistance                                                -40°C to + 100°C

Application                                                                   temperature +5°C to +40°C



Application should be done in a ventilated area away from any heat source. Wear protective gear for hands and eyes and avoid breathing of vapor. If mixed resin comes into contact with the skin, it should be promptly removed before hardening with paper towel. After curing, remove from hands with water and soap . In case of heavy vapor inhalation, place affected person in an open-air area. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In all cases, seek medical attention. In case of fire, use CO2 foam to extinguish. Tightly seal containers when not in use, store them away from heat and carefully dispose empty ones