Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Weber Dry 136 FX (A+B)

by Weber
Original price Dhs. 105.00 - Original price Dhs. 135.00
Original price
Dhs. 105.00
Dhs. 105.00 - Dhs. 135.00
Current price Dhs. 105.00
Size: 22.5KG
Color: Grey

Weber dry 136 FX Grey/White is a two-component cement latex modified elastomeric waterproofing coating used as a waterproof lining over masonry and concrete.

weber dry 136 FX Grey/White is composed of a cement mortar with additives, and of a liquid component. Mixed together on site, the product is easy to apply and is used as an effective protection coating on walls against: water-borne salts (chlorides, sulfates), wear, weather and chemicals, atmospheric gases and carbonation, from rusting of steel reinforcements. It is a non shrink , non-flammable mortar.

weber dry 136 FX Grey/White is available in white and grey colors. For other colors, contact Company's Technical Department.

SCOPE OF USE

• Renovate concrete surfaces

• Waterproof lining for drinking water reservoirs and structures

• Sealing and coating bar holes to ensure water tightness

• Foundation protection

• Waterproofing for roofs

• Waterproofing under tiles in wet areas, outdoors and swimming pools

• Waterproofing of gypsum board

• To provide protection to concrete surfaces from carbonation and chloride attack

INSTRUCTIONS FOR USE :

SURFACE PREPARATION :

The substrate must be perfectly sound, clean, free from grease, dust and friable matters. Damp down the concrete surface with clean water, but free of standing water.

PRODUCT PREPARATION :

Mix the 2 components: A powder + B liquid, so as to obtain a creamy coating which can be applied with a brush.

PRODUCT APPLICATION :

Apply 1st layer of weber dry 136 FX Grey/White with sufficient thickness to plug pores, cracks, holes: 1kg/m². Apply the 2nd and 3rd layers (if needed) in the proportions of 0,5 to 1 kg/m². In dry weather, wind or sunshine, take all necessary measures to prevent the coating from violent draughts. It is recommended to avoid direct exposure to sunshine. Work in the shade if possible.

COVERAGE :

1.6 kg/m² at 1 mm thickness

STORAGE :

Can be stored up to 6 months from manufacturing date, in original packaging, non open, protected from humidity, hot or freezing temperature.

SAFETY PRECAUTIONS :

The product contains cement powders which, when mixed with water, release alkalis that could be harmful to the skin. It is preferable that the application be done in a ventilated area, and to wear protective gear for hands, eyes and respiratory system and to avoid breathing of the dust. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting, in both cases seek medical attention. The product is non-flammable.