Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Hydroseal P

Original price Dhs. 95.00 - Original price Dhs. 135.00
Original price
Dhs. 95.00
Dhs. 95.00 - Dhs. 135.00
Current price Dhs. 95.00
Size: 10 x 20mm

Hydroseal P is a hydrophilic rubber based on polyurethane, which is available in different sizes. Hydroseal P is used for sealing purposes in civil engineering, structural engineering as well as tunneling for waterpressure up to 5bar. Hydroseal P has a three dimensional polymer structure, which is build up from unstructured polyurethane chains (macromolecules). The elastomeric features arise due to the weak cross linkage of the polymer chains. The swelling ability happens due to hydrophilic polymer resins,which can expand in contact with water in excess of 300% by volume. Hydroseal P is used for sealing of construction joints, restoration of expansion joints, sealing of precast concrete segments, sealing of tubbing part in tunneling, proofing of shafts and pipe penetrations.

APPLICATION INSTRUCTIONS :

Sealing of construction joints : 

For the successful application of Hydroseal P in construction joints, the profile has to be placed into the center of the reinforcement or at least 10 cm away from the concrete flanks. It has to be adhered fully with Polyseal PP / Polyseal Swell / Bitubond N to the substrate. If necessary the profile can also be nailed onto the concrete. It has to be sure that the profile cannot change its position while concreting. Rough surfaces should be smoothened before adhering the profile. This can be achieved with the application of Polycrete concrete repair products or with the sealant Polyseal Swell which develops in contact with water expansion to seal any gap or undulations between the surface and Hdyroseal P.

Jointing of end and side laps : 

Joints and lap-over areas are to be fixed by means of Polyseal Swell / Polyseal PP / Bitubond N.

Sealing of precast concrete segments : 

If used for sealing of precast concrete elements it is recommended to create a notch in the segments. The applied profile is chosen so that the elements create already at assembling a prestress. A proper plugging can be achieved with mounting cements like Polyquick FS or a permanently elastic sealant e.g. Polyseal PP

STORAGE & SHELF LIFE : 

Store all material between 10 and 25°C in a cool, covered dry place. Do not expose the containers to direct sunlight and keep away from all sources of heat. In tropical climatic conditions, the product has to be stored in an airconditioned environment and protected from high humidity. The shelf life of the product is 12 months in unopened condition if stored as per the recommendations. Exposure to high temperature and humidity will result in considerable deterioration of the product and reduce its shelf life.

HEALTH & SAFETY : 

As with all construction chemical products caution should be always be exercised whilst usage. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately and seek medical advice. Should any of the product be accidentally swallowed do not induce vomiting, but call for medical assistance immediately. Ensure that the container is available for medical attendant to examine any relevant instructions and contents details. For any further information please refer to the material safety datasheet

SUPPLY : 

Hydroseal P 10x20mm 10numbers of 5m roles in one box 20x20mm 8numbers of 5m roles in one box