Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Polyflex

Original price Dhs. 78.00 - Original price Dhs. 80.00
Original price
Dhs. 78.00
Dhs. 78.00 - Dhs. 80.00
Current price Dhs. 78.00
Size: 15kg + 5L
Color: Grey
  • Description
  • Product Scope
  • Application Guide
  • Data Sheet
  • Two part acrylic modified cementitious waterproofing coating

    Polyflex is a two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. It cures to form a tough flexible coating having excellent waterproofing properties. Polyflex is a blend of cement, selected fillers, polymers and graded silica sand which is in the powder form. The liquid contains acrylic co-polymers and wetting agents.

    Properties

    • Good flexibility. Thermal co-efficient of expansion similar to that of concrete
    • Good adhesion to both, porous and non porous surfaces
    • Good mechanical properties
    • Suitable for light pedestrian traffic
    • Excellent durability to long term weathering effect and UV
    • Non toxic, therefore suitable for use in potable water applications
    • Resistant to carbon dioxide and chloride ion diffusion

  • Recommended use

    Polyflex is a two part acrylic modified cementitious coating which can be used as a waterproofing and protective coating for the following structures:

    • Pile heads
    • Internal lining for potable water reservoirs and other water retaining structures
    • protection of exposed concrete structures like bridge decks against carbonation and chloride attack
    • inverted roofs, lift and inspection pits, swimming pools, spillways
    • backing on marbles and granites to prevent the ingress of moisture – general construction waterproofing
    • wet area (bathroom, kitchen, balcony, swimming pool and other features
    • moisture vapor barrier on facade damp proofing


  • Step by Step

    The application temperature should be between 5°C to 45°C. Application procedures may vary slightly depending upon site conditions. The general recommended guidelines for the application of the coating system is as follows:

    Surface Preparation
    The surface must be structurally sound and free of oil, grease, dust and other contaminants which will affect the bonding. Any structural cracks and potholes shall be repaired with a suitable repair mortar from the Polycrete range of repair mortars. The surface to be treated should be pre-saturated with water prior to application. However, any standing water shall be removed prior to application.

    Priming
    Polyflex is supplied in two pre-measured parts which just requires on site mixing. Do not mix more material than that can be used within the pot life. Part mixing can be carried out by mixing 3 parts of powder with 1 part of liquid (by weight). Pour the liquid into a suitable container and slowly add the powder to the liquid. Mix the contents using a slow speed drill (300-400rpm) fitted to a proprietary paddle mixer till a homogenous, lump free and creamy consistency is achieved. DO NOT ADD WATER TO DILUTE THE MATERIAL.

    Application
    It is recommended to apply Polyflex in two coats to provide a minimum thickness of 2mm for heavily trafficked areas and water retaining structures. Each coat shall be applied @1.8 kg/m2 which will give a dry film thickness of 1mm. The coating can be applied with a stiff brush or by an airless spray of nozzle size of 3-4mm and a pressure of 6-7 bar. After the application of the first coat and whilst the coating is still wet, embed a glass fibre mesh at all corners and other joints for added reinforcement. The second coat shall be applied after the first coat dries off completely (6-8 hours @25°C, 50% RH). For general waterproofing and protection against carbonation and alkali attacks, the coating can be applied in 1mm thickness.

    Coverage
    1.8kg per m2 per coat for 1mm dry film thickness.
    (approx 5-6sqm per 20kg set when applied 2 coats)

    Mixing Proportion
    Ready to use

    Colour and Quantity
    Grey & Off-White in 20kg kit (15kg  bag + 5L pail)

    Disclaimer 
    The information in this document is given to the best of Polybit's knowledge, based on laboratory testing and practical experience. Polybit's products are considered as semi-finished goods and as such, products are often used under conditions beyond Polybit's control. Polybit cannot guarantee anything but the quality of the product itself.