Acrylic Primer Exterior

Recommended use

Ideal for priming exterior surfaces. Can also be used to prime interior surfaces.

Can be used for cement plaster, concrete, block work, rendered surfaces etc. Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.

The product can be applied by
Roller : Recommended.
Brush : Recommended to paint corners and edges.
Spray : Airless spray or Conventional spray.

Cleaning of painting tools
Water is enough. But using an enamel based thinner will make the cleaning a lot faster.

Coverage
10 sqm / L (for applying 1 coat)

Thinner and Dilution
Use Water. But maximum 10%

Recommended paint system
Primer: 1 coat x Acrylic Primer
Topcoat: 2 coat x Jotashield Colourlast Matt / Silk
If you are painting over an already painted wall, you can decide to directly use a topcoat, skipping primer. Nevertheless, there is no harm in using a primer as it will help in bonding the new paint better with existing paint.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself.

Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.

Not Applicable

Primers come in only 1 colour - White. We can make only custom colours for topcoat.