Two-component high performance epoxy tile grout and adhesive

weberepox easy is a 100% reactive, 2-component epoxy tile grout and tile adhesive with very easy water cleanable properties exceeding the requirement of the standard ANSI 118.3, excellent chemical resistance, high strength and easy application.

weberepox easy is designed for numerous application needs. In addition to its waterproofing and excellent workability properties, it is especially blended to produce non-sag and stain resistant properties when used as tile grout, non-slip property when used as tile adhesive and high compressive strength. Due to its special additives, the product maintains a good workability even after 1 hour at 40 deg C.

weberepox easy is particularly recommended for tile grouting in medium and heavy duty, hygienic and corrosive environment. It is available in a wide range of attractive colors (consult our Tile grouts color chart).

Surface of application

Floor, Roof, Wall, External floor

Available packing :

Lebanon	UAE	KSA	Oman	Qatar	Kuwait	Jordan	Egypt
3.8 kg	4 kg	4 kg	4 kg	4 kg	4 kg	4 kg	4 kg

Feature and benefits :

Two components easy to mix
Easy to apply
Easy and fast to clean
Anti-bacterial
Good workability after 1 hour at 40°C
High compressive strength at 14 days
Excellent chemical resistance
Non-sag
Slip resistant when used as tile adhesive
Good heat aging resistance
Anti-Stain

Things to consider :

Two components: pour part B then mix part A & part B together
Pot life: 4 hours
Can be applied for joints width from 2 to 10mm
Very easy to clean with water wetted sponge
Drill mixer machine to be used
Do not apply on wet substrates
Do not add water to the mixture
Make sure that joints and tile surface are well cleaned, and dried
Remove dust or other contaminants with an air blower
Do not clean tiles with acid cleaners
New concrete must be a minimum of 28 days old
The surface to be covered shall be sound, dry, rigid, clean and free from impurities like grout, dirt, debris, oil, grease, curing agents, loose plaster etc...
Do not leave excess grout on face of tiles
Smooth the joints by using a wet sponge then clean the tiles immediately, before the product dries, by using a clean and wet sponge
Clean tools and equipment with water before the material dries and hardens on equipment

Products

Filters

National Guard Epoxy Filler S.F

Weber Epoxy Easy Grout