Skip to content

For Bulk Enquiries : Get Free Quote

For Bulk Enquiries : Get Free Quote

Weber Dry Protect

by Weber
Original price Dhs. 215.00 - Original price Dhs. 215.00
Original price
Dhs. 215.00
Dhs. 215.00 - Dhs. 215.00
Current price Dhs. 215.00
Size: 5L

Weberdry protect is a ready-to-use high performance solution, used to impact both water repellency and oil repellency to inorganic porous substrates such as tiles and stones without altering surface properties. It can be used as well for dirt repellent treatment. Made of Silane, siloxane and synthetic resins in diluted form, it penetrates the pores without creating a film on the surface, so the pores of the substrates remain open and consequently the water vapor diffusion is hardly affected. The product has very strong penetration properties due to low molecular weight. It should be used on air dry and absorbent surface.

SCOPE OF USE : 

weberdry protect is specially formulated to treat and protect the surface of tiles and stones as well as the external façades. weber.stone proof leaves a colorless appearance once applied on the surface. It can be applied on any type of tiles/stones, but the compatibility with the tile/stone should be tested on a small sample prior to application. weberdry protect also helps in preventing the formation of mould and fungus on tile grouts.

INSTRUCTIONS FOR USE PRODUCT PREPARATION :

All surfaces should be sound, clean, dry, free from oil or dust. Tile adhesives and grouts should have completely dried and have acquired the recommended strength before application.

PRODUCT APPLICATION : 

weberdry protect is applied by brush, immersion or spray. In the latter case, the nozzle must be held near the surface to facilitate penetration. Tiles and stones need to be treated for saturation twice; the second layer must be applied before the first layer has totally dried (wet on wet). Best results are reached with a dry, absorbent surface. Always perform a test on a small sample before application.

RECOMMENDATION : 

It is strongly recommended to carry out a sample trial on site before any application on the tiles and stones.

CONSUMPTION : 

Consumption depends on the absorption of tiles or stones. It ranges between 0.05 and 0.14 liter/m². Always perform a test before application, to check the compatibility between dry protect and the tile/stone STORAGE 1 year from manufacturing date, in non-open original packaging. The containers must be protected from direct sunlight.

SAFETY PRECAUTIONS :

It is preferable that the application be done in a ventilated area, and to wear protective gear for hands , eyes and respiratory system. Splashes on the skin should be washed away by cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting; in both cases seek medical attention. The product is non-flammable.